Category filter
How to Calibrate Zebra Printers Remotely with Hexnode UEM
TL;DR
Run manual calibration when a Zebra printer misdetects media or prints labels incorrectly. Check the media and ribbon first; calibration feeds and uses some labels. Afterward, print a test label to confirm the issue is fixed.
Use the Calibrate remote action when a Zebra printer’s automatic calibration fails or the printer does not detect media correctly. Common signs include printing on the wrong part of a label, skipping labels, stopping between labels, or reporting that media is out when it is loaded.
During calibration, the printer feeds media to recalibrate its media sensor (and ribbon sensor on thermal transfer printers). This uses up some labels or other loaded media, so make sure enough media is available before starting.
Before you calibrate
- Confirm that the media is loaded correctly and that the printer is ready.
- Check that the media type and size are appropriate for the print job.
- Ensure the printer has enough media for the feed during calibration.
- If the printer uses a ribbon, check that it is loaded correctly.
How to calibrate a Zebra printer?
Technicians can use the Calibrate action for an individual Zebra printer or apply it as a bulk action to multiple selected printers.
Calibrate a Single Zebra Printer
- Log in to the Hexnode UEM portal.
- Navigate to Manage > Endpoints.
- Select the Zebra printer to open its Device Summary page.
- Select Calibrate under Actions > Device Control.
Calibrate Multiple Zebra Printers
- Log in to the Hexnode UEM portal.
- Navigate to Manage > Endpoints.
- Select the checkboxes for all target Zebra printers.
- Select Calibrate under Actions > Device Control.
After calibration
Wait for the printer to finish feeding media, then print a test label. Check that the content is positioned correctly and that the printer detects label gaps or marks as expected. If the issue continues, check the media loading and sensor area, then consult the printer’s documentation or support resources.
Frequently Asked Questions
Will calibration use labels?
Yes. The printer feeds media during calibration, so some labels or other loaded media will be used.