Skip to main content

Category filter

Why the add device option is unavailable for Dynamic device groups in Hexnode

TL;DR

Devices cannot be manually added to a Dynamic device group in Hexnode. Dynamic groups automatically include devices that match the configured custom filters and criteria. If the add device option is not available, review the Dynamic group criteria and confirm that the device satisfies those criteria for automatic inclusion.

Executive Summary

A missing manual add option in a Dynamic device group is expected behavior. Dynamic groups are criteria-based groups: Hexnode evaluates the configured filters and automatically adds matching devices to the group. To include a device in a Dynamic device group, update or verify the group criteria so that the target device matches the configured conditions.

Why devices cannot be manually added to a Dynamic device group

Dynamic device groups do not use manual device assignment. Their membership is generated automatically based on the filters and criteria configured for the group.

If a device does not appear in a Dynamic device group, it usually means the device does not currently meet the configured criteria. The group membership updates when devices match the defined conditions.

Note:


The absence of a manual add device option in a Dynamic device group is not an error. It indicates that the group is managed by criteria-based automation.

How to add a device to a Dynamic device group

To include a device in a Dynamic device group, make sure the device matches the group criteria.

  1. Review the custom filters and criteria configured for the Dynamic device group.
  2. Compare the target device properties with the configured criteria.
  3. If required, adjust the criteria so that the intended device is included.
  4. Allow Hexnode to automatically add the matching device to the Dynamic device group.

When to review the Dynamic group criteria

Review the criteria when:

  • The expected device does not appear in the Dynamic device group.
  • The group does not show an option to manually add devices.
  • The filters were configured earlier and may no longer match the device properties.
  • The device belongs to a different classification than the one defined in the group criteria.

Frequently Asked Questions

Why is there no add device option in my Dynamic device group?

Dynamic device groups are automatically populated based on custom filters and configured criteria. Since membership is criteria-based, Hexnode does not provide a manual add device option for Dynamic groups.

How do I make a device appear in a Dynamic device group?

Verify that the device meets the filters and criteria configured for the Dynamic device group. Once the device matches the criteria, it is automatically added to the group.

Is the missing manual add option a configuration issue?

No. For Dynamic device groups, the missing manual add option is expected behavior. The device group membership is controlled by the configured criteria.

What should I check if a device is not added automatically?

Check the custom filters and criteria configured for the Dynamic device group, then confirm that the target device satisfies those criteria.

FAQ