Skip to main content

Category filter

Fix macOS app installation not progressing after using Install Application action

TL;DR

If a macOS app deployment does not progress after using Actions > Applications > Install Application, scan the device in Hexnode, verify that the device syncs successfully, and then retry the installation action.

Executive summary

A macOS app installation action may remain pending or fail to move forward when the device status in Hexnode is not refreshed, even if a manual sync appears successful. For app deployments triggered using Actions > Applications > Install Application, running a device scan can refresh the device state in Hexnode. After the scan completes, retrying the installation action can allow the app deployment to proceed.

When to use this fix

  • The target device is a macOS device.
  • The app was deployed using Actions > Applications > Install Application.
  • The app installation does not start or remains pending.
  • The device shows an outdated last checked in status.
  • A manual sync completes, but the app installation still does not progress.

Resolve the pending macOS app installation

  1. Open the affected macOS device record in Hexnode.
  2. Run a device scan to refresh the device status in Hexnode.
  3. Confirm that the device syncs or checks in successfully after the scan.
  4. Retry the app deployment using Actions > Applications > Install Application.
  5. Review the Action History to verify that the installation action is progressing.
Note:


Avoid repeatedly retrying the app installation while the device status remains stale. Refresh the device status first, then retry the installation action.

Confirmed outcome

After scanning the macOS device and retrying the installation, the app deployment proceeds successfully through Hexnode.

Frequently Asked Questions

What should be checked after scanning the device?

Verify that the device syncs or checks in successfully, then retry Actions > Applications > Install Application and review the Action History.

Can a manual sync alone resolve the issue?

A manual sync may confirm device communication, but if the app installation still does not progress, scan the device in Hexnode and retry the installation action.

Deploying and Managing Apps