Private APN VPN gateway placement for Hexnode kiosk devicesSolved

Participant
Discussion
1 month ago Oct 12, 2026

We are planning a setup where managed devices use SIM cards with a private APN and static IPs. The devices may be locked in Single-App, Multi-App, or Web Kiosk mode and need to communicate securely through a dedicated VPN.

I’m trying to understand where the VPN gateway should be placed so the devices can communicate with Hexnode. Is the private APN cloud facility hosted by Hexnode, or is it part of the carrier network?

Replies (3)

Marked SolutionPending Review
Hexnode Expert
1 month ago Oct 12, 2026
Marked SolutionPending Review

Hello @liam_t ,

In a private APN deployment, Hexnode UEM does not host the private APN infrastructure. The private APN and its associated network facility are typically provided by your Mobile Network Operator or cellular carrier.

Hexnode UEM acts as the management plane. It pushes configurations such as APN settings, VPN settings, kiosk restrictions, and remote actions to managed devices, but the carrier and your network infrastructure handle the private APN routing.

For VPN gateway placement:

  • If you use Hexnode cloud, the VPN gateway should usually be placed in your corporate data center or enterprise cloud environment. It must bridge the carrier’s private APN network with routing that allows the devices to reach the Hexnode cloud service.
  • If you use an on-premises Hexnode UEM server, the VPN gateway should be in your corporate network DMZ or another network segment that has direct routing access to the server hosting Hexnode.

In both cases, the devices must be able to communicate with the relevant Hexnode service endpoint. If that route is blocked by the private APN, VPN, firewall, or carrier configuration, MDM commands and real-time actions may not reach the devices.

Regards,
Simon Scott
Hexnode UEM

Marked SolutionPending Review
Participant
1 month ago Oct 12, 2026
Marked SolutionPending Review

Okayy got it. Also, if we want to send messages from the Hexnode portal to these kiosk devices, is that done through a policy, or does it use a separate action?

Marked SolutionPending Review
Hexnode Expert
1 month ago Oct 12, 2026
Marked SolutionPending Review

Admin messages are sent from the Hexnode UEM portal using a remote action, not by creating a policy.

To send a message:

  1. Go to Manage > Endpoints.
  2. Select the target device or device group.
  3. Click Actions.
  4. Choose Broadcast Message.
  5. Enter the message and send it.

The message appears as a notification pop-up almost immediately if the device is online and can communicate with Hexnode. If the user misses the pop-up, the message is stored in the Messages section of the Hexnode app on the device.

For Android kiosk devices, there is one additional policy setting to make admin messages visible inside kiosk mode:

Policies > Kiosk Lockdown > Android Kiosk Lockdown > Peripheral Settings > Messenger > enable View messages sent by admin

So the message is sent through a remote action, while the policy controls whether kiosk users can view those admin messages from within the kiosk environment.

Save